Kitchen Display System on an Elo Device

• Related Articles

• How to Set Up a Kitchen Printer to Your Clover Kiosk?

  1. Verify your kitchen printer is in the same network as your Clover device to pair the printer to each device. 2. If you wish to configure printers remotely, log onto Applova Business Manager to configure printers. Do not configure any printer in ...

• Setting Up Elo Device as the Self-Ordering Kiosk

  Please access the link below on the guide on setting up the Elo device as the self-ordering kiosk.  https://applova-resources.s3.amazonaws.com/guides/elo/Setup-Elo-Device-as-Kiosk-Standalone.pdf

• How to Connect the Star Printer (TSP143IV) to the Wi-Fi via the iOS Device?

  Before proceeding with the following steps, ensure that you have completed the steps outlined in the article linked below. How to Set Up the Star Printer TSP143IV? Note that the printer cannot connect to a 5G network. Ensure that the network you're ...

• How to Connect the Star Printer (TSP143IV) to the Wi-Fi via the Android Device?

  Do not share this guide with merchants Before proceeding with the following steps, ensure that you have completed the steps outlined in the article linked below. How to Set Up the Star Printer TSP100IV? Note that the printer cannot connect to a 5G ...

• How to replace a kitchen printer's ink cartridge?

  Open the printer’s front cover by holding the finger grips on both ends of the cover and lifting Remove the old cassette Turn the ribbon feed knob on the new cassette to remove slack in the ribbon Insert the cassette and push down (You should hear ...