How to Connect the Star Printer (TSP143IV) to the Wi-Fi via the Android Device?
Do not share this guide with merchants
Before proceeding with the following steps, ensure that you have completed the steps outlined in the article linked below.
Note that the printer cannot connect to a 5G network. Ensure that the network you're trying to connect to operates exclusively on 2.4G network.
Connecting the Android Device to the Printer
If its not connected to a network, then the SSID and the device name will be blank, and the green light will be blinking.
Step 1
Open the setting screen of the mobile phone and turn on the "Wi-Fi".
Step 2
Select the Wi-Fi connection with the name of the printer. (Example: TSP143IV)
Step 3
Download the "Star Quick Setup Utility" via the Play Store to your mobile phone and open it.
Step 4
Tap on "Start Guide (Initial Settings)".
Step 3
Then tap on "Use Wireless LAN".
Step 5
Select the "MCW10" model out of the two options.
Step 6
Tap on "Next" four times.
Step 7
Follow the instructions that appear on the screen and tap on "Wireless LAN Unit Setup" to setup network configurations.
Step 8
Enter the SSID and the password of the network that the printer need to be connected to. Then tap on "Apply".
Now the printer is connected to the Wi-Fi.
When connecting to a new network connection, long press the Reset button located on the side of the MCW10, until the power LED starts blinking.
Next, follow the steps in the below linked article to setup the printer to the POS
Related Articles
Related Articles
How to Connect the Star Printer (TSP143IV) to the Wi-Fi via the iOS Device?
Before proceeding with the following steps, ensure that you have completed the steps outlined in the article linked below. How to Set Up the Star Printer TSP143IV? Note that the printer cannot connect to a 5G network. Ensure that the network you're ...How to Set Up the Star Printer TSP143IV?
Printer Accessories The accessories shown in the image below are included with the printer. The TSP143IV Printer Power Cable LAN Cable USB Cable Paper Roll Guide Set Up Guides Image Link The MCW10 unit shown in the image shown below is installed ...Error Statuses for Star TSP143IV Printer
For Normal Use Power Off When the printer is switched off all the LEDs will be switched off. Image Link Power On Image Link USB Hub Connection A USB hub is connected to the USB-A port. (A USB hub cannot be used.) The LED blinks for about 5 seconds ...How to Connect the Star TSP143IV Printer to the Router via Ethernet Cable?
Before proceeding with the following steps, ensure that you have completed the steps outlined in the article linked below. How to Set Up the Star Printer TSP143IV? Step 1 Plug the power cable into the printer's power port. Step 2 Plug the other end ...How to change a printer name in a Clover business?
When setting up multiple printers to your Clover Kiosk, You can edit your printer name to improve the order flow. However device printer names like Station, Mini, Flex can not be changed but devices like Star printer can be changed as Kitchen. To add ...