How to replace a kitchen printer's ink cartridge?

How to replace a kitchen printer's ink cartridge?

  1. Open the printer’s front cover by holding the finger grips on both ends of the cover and lifting
  2. Remove the old cassette
  3. Turn the ribbon feed knob on the new cassette to remove slack in the ribbon
  4. Insert the cassette and push down (You should hear and feel a click)
  5. The Power light should glow green and the Error light should be off

    • Related Articles

    • How to set up a Kitchen Printer to Your Clover Kiosk?

      1. Verify your kitchen printer is in the same network as your Clover device to pair the printer to each device. 2. If you wish to configure printers remotely, log onto Apptizer Business Manager to configure printers. Do not configure any printer in ...

    • How to change a printer name in a Clover business?

      When setting up multiple printers to your Clover Kiosk, You can edit your printer name to improve the order flow. However device printer names like Station, Mini, Flex can not be changed but devices like Star printer can be changed as Kitchen. To add ...

    • How to remove a printer from your Clover Kiosk?

      Log on to your Clover Device Go to Printers App Tap on the printer you wish to remove Tap Delete on the top right of the page Image Link

    • Kitchen Display System on an Elo Device

      Please refer to the following link on how to setup kitchen display system on Elo device.  https://applova-resources.s3.amazonaws.com/guides/applications/kitchen-display/Setup-Elo-Device-as-KDS.pdf

    • How to Assemble the Teamsable Kiosk

      Please follow the steps mentioned below to assemble the Teamsable kiosk. 1. Place the kiosk stand on a table or an elevated surface. Image Link 2. Use six screws as shown on the image to screw in the base. Image Link 3. Place the kiosk stand upright ...