How to Assemble the Teamsable Kiosk
Please follow the steps mentioned below to assemble the Teamsable kiosk.
1. Place the kiosk stand on a table or an elevated surface.
2. Use six screws as shown on the image to screw in the base.
3. Place the kiosk stand upright on the floor.
Remove the ten screws as shown on the image and open the back panel.
4. Mount the 22N power supply to the stand by using double-sided tape.
5. Route the USB and power cable through the top opening.
6. Route the power supply cables through the bottom and connect them both.
7. Align the bracket with the 22N and screw it to the stand through the VES holes.
8. Attach the PAX bracket to the mount.
9. Reattach the back cover by screwing back the ten screws.
How to load the printer paper?
10. Click on the eject button on the printer as demonstrated on the image.
11. Pull the bottom of the paper roll size divider.
12. Place the paper roll facing down with enough paper to exit the printer. Close the printer.
Related Articles
Setting Up Elo Device as the Self-Ordering Kiosk
Please access the link below on the guide on setting up the Elo device as the self-ordering kiosk. https://applova-resources.s3.amazonaws.com/guides/elo/Setup-Elo-Device-as-Kiosk-Standalone.pdfHow to Set Up a Kitchen Printer to Your Clover Kiosk?
1. Verify your kitchen printer is in the same network as your Clover device to pair the printer to each device. 2. If you wish to configure printers remotely, log onto Applova Business Manager to configure printers. Do not configure any printer in ...How to remove a printer from your Clover Kiosk?
Log on to your Clover Device Go to Printers App Tap on the printer you wish to remove Tap Delete on the top right of the page Image LinkHow to change a printer name in a Clover business?
When setting up multiple printers to your Clover Kiosk, You can edit your printer name to improve the order flow. However device printer names like Station, Mini, Flex can not be changed but devices like Star printer can be changed as Kitchen. To add ...